 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Ordering number : ENN6779 MCH6401 N-Channel Silicon MOSFET MCH6401 Ultrahigh-Speed Switching Applications Features * * * Package Dimensions unit : mm 2193 [MCH6401] 0.25 0.3 0.15 Low ON-resistance. Ultrahigh-speed switching. 2.5V drive. 6 5 4 1.6 2.1 1 0.25 23 0.65 2.0 0.15 Specifications Absolute Maximum Ratings at Ta=25C Parameter Drain-to-Source Voltage Gate-to-Source Voltage Drain Current (DC) Drain Current (Pulse) Allowable Power Dissipation Channel Temperature Storage Temperature Symbol VDSS VGSS ID IDP PD Tch Tstg PW10s, duty cycle1% Conditions 1 : Drain 2 : Drain 3 : Gate 4 : Source 5 : Drain 6 : Drain SANYO : MCPH6 Ratings 20 10 4 16 1.5 150 --55 to +150 Unit V V A A W C C Mounted on a ceramic board (900mm2!0.8mm) Electrical Characteristics at Ta=25C Parameter Drain-to-Source Breakdown Voltage Zero-Gate Voltage Drain Current Gate-to-Source Leakage Current Cutoff Voltage Forward Transfer Admittance Static Drain-to-Source On-State Resistance Input Capacitance Output Capacitance Reverse Transfer Capacitance Symbol V(BR)DSS IDSS IGSS VGS(off) yfs RDS(on)1 RDS(on)2 Ciss Coss Crss Conditions ID=1mA, VGS=0 VDS=20V, VGS=0 VGS=8V, VDS=0 VDS=10V, ID=1mA VDS=10V, ID=2A ID=2A, VGS=4V ID=1A, VGS=2.5V VDS=10V, f=1MHz VDS=10V, f=1MHz VDS=10V, f=1MHz Ratings min 20 1 10 0.4 4.3 6.2 45 60 370 120 80 59 84 1.3 typ max Unit V A A V S m m pF pF pF Marking : KA 0.85 Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN N1500 TS IM TA-2907 No.6779-1/4 MCH6401 Continued from preceding page. Parameter Turn-ON Delay Time Rise Time Turn-OFF Delay Time Fall Time Total Gate Charge Gate-to-Source Charge Gate-to-Drain "Miller" Charge Diode Forward Voltage Symbol td(on) tr td(off) tf Qg Qgs Qgd VSD Conditions See specified Test Circuit See specified Test Circuit See specified Test Circuit See specified Test Circuit VDS=10V, VGS=10V, ID=4A VDS=10V, VGS=10V, ID=4A VDS=10V, VGS=10V, ID=4A IS=4A, VGS=0 Ratings min typ 12 42 39 40 12 0.8 1.8 0.84 1.2 max Unit ns ns ns ns nC nC nC V Switching Time Test Circuit VDD=10V VIN 4V 0V VIN PW=10s D.C.1% ID=2A RL=5 D VOUT G P.G 50 MCH6401 S 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 0 0.1 0.2 0.3 ID -- VDS 3.5V 6 ID -- VGS VDS=10V 3.0V 2.5V V Drain Current, ID -- A 5 Drain Current, ID -- A 4.0V 2.0 4 6.0V VGS=1.5V 3 2 1 0 0.4 0.5 0.6 0.7 0.8 0.9 1.0 0 0.5 1.0 1.5 2.0 2.5 IT02606 Drain-to-Source Voltage, VDS -- V 200 IT02605 120 RDS(on) -- VGS Gate-to-Source Voltage, VGS -- V RDS(on) -- Ta Ta=25C Static Drain-to-Source On-State Resistance, RDS(on) -- m Static Drain-to-Source On-State Resistance, RDS(on) -- m 180 160 140 120 100 80 60 40 20 0 0 1 2 3 4 5 6 7 8 9 10 100 80 ID=1A 2A 60 I D= =2.5 VGS 1A, A, VG I D=2 40 20 0 --60 --40 --20 0 20 40 60 25 -C 25C V Ta= 7 5C 4.0V S= 80 100 120 140 160 Gate-to-Source Voltage, VGS -- V IT02607 Ambient Temperature, Ta -- C IT02608 No.6779-2/4 MCH6401 Forward Transfer Admittance, yfs -- S 100 7 5 3 2 10 7 5 3 2 1.0 7 5 3 2 0.1 0.1 2 3 5 7 2 3 5 7 yfs -- ID VDS=10V 10 7 5 3 2 IF -- VSD VGS=0 Forward Current, IF -- A 0.01 7 5 3 2 0 0.2 0.4 0.6 0.8 1.0 1.2 IT02610 0.001 1.0 Drain Current, ID -- A 100 7 5 10 IT02609 1000 7 5 SW Time -- ID Diode Forward Voltage, VSD -- V Ciss, Coss, Crss -- VDS f=1MHz VDD=10V VGS=4V Ciss, Coss, Crss -- pF td (off) tf Switching Time, SW Time -- ns 3 2 3 2 tr 100 7 5 3 td(on) 10 7 0.1 2 3 5 7 1.0 2 3 5 7 10 0 2 4 6 5C 25 C --25 C Ciss Coss C --25 Ta= 75C 1.0 7 5 3 2 0.1 7 5 3 2 25C Ta= 7 Crss 8 10 12 14 16 18 20 Drain Current, ID -- A 10 9 IT02611 5 3 2 10 7 5 3 2 1.0 7 5 3 2 0.1 7 5 3 2 VGS -- Qg Drain-to-Source Voltage, VDS -- V IT02612 ASO Gate-to-Source Voltage, VGS -- V VDS=10V ID=4A Drain Current, ID -- A IDP=16A ID=4A <10s 100s 1m 10 s 8 7 6 5 4 3 2 1 0 0 2 4 6 8 10 12 14 IT02613 DC 100 ope rat ms ms Operation in this area is limited by RDS(on). ion 0.01 0.1 Ta=25C Single pulse Mounted on a ceramic board(900mm2 !0.8mm) 2 3 5 7 1.0 2 3 5 7 10 2 3 Total Gate Charge, Qg -- nC 2.0 PD -- Ta Drain-to-Source Voltage, VDS -- V IT02614 Allowable Power Dissipation, PD -- W 1.5 M ou nte do na 1.0 ce ram ic bo ard (9 00 0.5 mm 2 !0 .8m m) 140 160 0 0 20 40 60 80 100 120 Ambient Temperature, Ta -- C IT02615 No.6779-3/4 MCH6401 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of November, 2000. Specifications and information herein are subject to change without notice. PS No.6779-4/4 |
Price & Availability of MCH6401
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |